Your position: Home > Shop by Lamp Base > E39/E40 LED

LED Corn Bulb 80W Large Mogul Screw Base E39 E40 High Bay Retrofit LED Bulb Replace 200W CFL Bulb/350W Metal Halides HPS for Garage Street Lighting

Replace 200W CFL Bulb/350W Metal Halides HPS by only 80W; Large Mogul Screw Base E39 or E40, 360 degreee beam angle. With aviation aluminium heat sink, ABS housing good corrosion resistance. No Ballast Required (Ballast must be removed or bypass).
Item Code: LST0804
Market Price:
USD $57.88
Price:
Save $8.44(14% Off)
PDF Format
    Please select the information you wantX
  • Color:
    Warm White Daylight
  • Ships From:
    China USA
+
-
Units 498 in Stock
  • Description
  • Specifiction
  • Application
  • Q&A

80W Large Mogul Base E39 E40 LED Corn Bulb


Features:

- 80% more energy saving compared with conventional light, CFL, Incandescent light; replace 200W CFL Bulb/350W Metal Halides HPS by only 80W;
- Input voltage: AC85-265V; Large Mogul Screw Base E39 or E40, 8000lm, 360 degreee beam angle. No Ballast Required (Ballast must be removed or bypass);
- With aviation aluminium heat sink, ABS housing good corrosion resistance, energy-saving, low power consumption, longer lifespan, less lumens depreciation;
- No uv or IR in the beam, Instant start, No flickering. Special surface design with arc, make sure the radiation diameter on the ground is accord with the standards for size.

 

Package:
1 X  80W Mogul Screw Base E39 E40 LED Corn Bulb


Notes:

1- LED Lights such as LED corn light series could not used in the unventilated fixture;
2- Make sure to cut off the power before install the LED Corn Bulb;
3- Make sure to remove or bypass the ballast from your existing CFL fixture before installation. Using the ballast will cause them to flicker or destroy the LED Bulb.

 

Tips:
How to remove/bypass the ballast?
Step 1. Ballast has a black and white wire on the input side. It also has two red and two blue output wires. To bypass this ballast cut all 6 wires.
Step 2. You can then connect the two red wires to the black wire.
Step 3. Next connect the two blue wires to the white wire.
Step 4. For multiple bulb fixtures, just repeat the steps on the other ballasts.




 





 

LEDs: 252pcs high brightness 5730 SMD chips
Dimension: D106*275MM (4.17*10.83inches)
Power: 80W
Input Voltage: AC85-265V 50-60hz
Light Color: Warm White 3000k/ Daylight 6000K
Lamp Base: Large Mogul Screw Base E39 or E40
Lumen:8000lm
Beam angle: 360°
CRI ≥80Ra

Replace 200W CFL Bulb/350W Metal Halides HPS;
-
Widely used in garage, street, garden, park, barn, patio, supermarket, station, home, office, hotel, restaurant, hospital, school, workshop, shopping mall etc.

Question:
Can this bulb be used in an open bottom outdoor fixture? How weather proof is it?
Answer:
 I use mine in an open bottom outdoor fixture but, I had to remove a ballast circuit board that ran the fluorescent bulb and was part of the dusk-to-dawn light sensor. If you don't remove that circuit board, it will destroy the LED bulb. I went down to Lowes and bought an dusk-to-dawn light sensor and wired it in between incoming power and the fixture. 
By LEDLightOne on June 26, 2018


Question: 
Can this bulb be used in an open bottom outdoor fixture? How weather proof is it?
Answer: 
I use mine in an open bottom outdoor fixture but, I had to remove a ballast circuit board that ran the fluorescent bulb and was part of the dusk-to-dawn light sensor. If you don't remove that circuit board, it will destroy the LED bulb. I went down to Lowes and bought an dusk-to-dawn light sensor and wired it in between incoming power and the fixture.
By LEDLightOne on July 26, 2017


Question:
What is the rated life in hours? What is the warranty?
Answer:
The rated life is 35000 hours, the warranty is 3 years. Please contact us if you have any quality issues during warranty time, we will always try our best to help. 
By LEDLightOne on March 06, 2017


Question:
Why would you need to do this for install: "make sure to remove or bypass the electronic ballast in the fixture before install the led corn bulb."?
Answer:
This led bulb is setup to be used as a regular incandescent light bulb is directly connected to 120 volt house current/voltage. No need for ballast. remove ballast to save energy and better led performance. 
By LEDLightOne on September 16, 2016

Customer Reviews
Average rating:

4(based on 37 reviews)

Share your thoughts with other customers